Hello, welcomeJiangsu Xuyang Chemical Equipment Co., Ltd.

Non-standard stainless steel reaction tank

Stainless steel reaction tank is composed of pot body, pot cover, agitator, electric heating oil clamp tube, supporting and driving device, shaft sealing device, oil overflow tank, etc., and is equipped with electric heating rod, temperature measuring and pressure measuring meter. Heat conduction oil is placed in the jacket, which is heated by electric heating rod. The jacket is opened with nozzle holes for oil inlet, oil discharge, overflow measurement, vent, electric heating rod and temperature measurement. The outer wall of the jacket is welded, and the lower part of the stainless steel reaction tank is provided with a feeding port.

24 Hours Tel:+8618921733114

Detailed Introduction

Non-standard stainless steel reaction tank
Stainless steel reaction tank is composed of pot body, pot cover, agitator, electric heating oil clamp tube, supporting and driving device, shaft sealing device, oil overflow tank, etc., and is equipped with electric heating rod, temperature measuring and pressure measuring meter.
Heat conduction oil is placed in the jacket, which is heated by electric heating rod. The jacket is opened with nozzle holes for oil inlet, oil discharge, overflow measurement, vent, electric heating rod and temperature measurement.
The outer wall of the jacket is welded, and the lower part of the stainless steel reaction tank is provided with a feeding port.
Properties: Main equipment for preparing polymer compounds.
Usually a vertical cylindrical autoclave with a jacket for steam or cold water for heating or cooling.
A stainless steel horizontal paddle agitator for emulsion polymerization, driven by an electric motor through a transmission device and a reducer.
The outer wall of the kettle is usually made of carbon steel and is lined with stainless steel or enamel.
Polymerization can be single batch production, also can be a series of continuous production of multiple reactors.
The polymeric reactants pass from the lower part of one reactor to the upper part of the next.
The kettle is equipped with temperature, pressure and other instruments, as well as inlet and outlet.
For bulk polymerization, there is no agitator in the kettle and no series connection.
In addition, there are rectangular metal box in the platter, at a certain rate of inflow and polymerization.

Recommended

Technical support: